| 阿立哌唑的制备工艺研究 |
| 投稿时间：2005-07-05 点此下载全文 |
| 引用本文：徐建明,吴秋业,孙青,张俊,俞世冲.阿立哌唑的制备工艺研究[J].药学实践杂志,2005,(5):269~270 |
| 摘要点击次数: 1851 |
| 全文下载次数: 963 |
| 作者 | 单位 | | 徐建明 | 第二军医大学药学院有机教研室, 上海, 200433 | | 吴秋业 | 第二军医大学药学院有机教研室, 上海, 200433 | | 孙青 | 第二军医大学药学院有机教研室, 上海, 200433 | | 张俊 | 第二军医大学药学院有机教研室, 上海, 200433 | | 俞世冲 | 第二军医大学药学院有机教研室, 上海, 200433 |
|
|
| 中文摘要:目的 优化阿立哌唑的制备工艺.方法 以7-羟基-3,4-二氢-2-(1H)-喹啉酮为起始原料,经与1,4-二溴丁烷醚化后,再与1-(2,3-二氯苯基)哌嗪缩合,制得阿立哌唑.结果 醚化时用丙酮替代DMF作溶剂,反应副产物减少;由中间体Ⅲ制备终产物Ⅰ原工艺采用萃取法纯化,溶剂消耗多,成本高,本文中改由直接大量多次水洗产品,操作简便,产物纯度符合要求,总收率达到71.3%.结论 优化后的制备工艺稳定可行,适合工业化生产要求. |
| 中文关键词:阿立哌唑 制备工艺 |
| |
| Research on preparation of aripiprazole |
|
|
| Abstract:Objective To optimize the preparation procedure of aripiprazole. Methods 7-hydroxy-3,4-dihydro-2(1H)-quinolin-one was used as starting material and etherified with 1,4-dibromobutane, then alkylated with 1-(2,3-dichlorophenyl) piperazine to yield the target compound aripiprazole. Results The DMF was replaced by acetone as solvent when etherification. The extraction purification method in the last step was replaced by washing precipitates with water. Aripiprazole was prepared in overall yield of 71. 3%. Conclusion The optimal preparation procedure is stable and available for industrial production. |
| keywords:aripiprazole preparation optimization |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
| 关闭 |
|
|
|
