水飞蓟素磷脂复合物的制备及体外溶出行为评价
投稿时间:2022-06-13  修订日期:2022-11-20  点此下载全文
引用本文:曾棋平,刘建清,杨丽娜,刘志宏,宋洪涛.水飞蓟素磷脂复合物的制备及体外溶出行为评价[J].药学实践杂志,2024,42(3):101~107
摘要点击次数: 87
全文下载次数: 126
作者单位E-mail
曾棋平 福建医科大学附属漳州市医院药学部, 福建 漳州 363000  
刘建清 泉州医学高等专科学校, 福建 泉州 362000  
杨丽娜 联勤保障部队第九〇九医院药剂科, 福建 漳州 363000  
刘志宏 联勤保障部队第九〇〇医院药剂科, 福建 福州 350025  
宋洪涛 联勤保障部队第九〇〇医院药剂科, 福建 福州 350025 sohoto@vip.163.com 
基金项目:国家自然科学基金面上项目(81073064);福建省自然科学基金(2015J01491)
中文摘要:目的 将水飞蓟素和磷脂复合以研制水飞蓟素磷脂复合物(silymarin phospholipids complex,SM-PC),并考察其基本理化性质。 方法 采用溶剂挥发法制备SM-PC。通过前期的单因素考察,选择脂药比、药物浓度以及反应温度作为星点设计-效应面法的考察因素,以SM-PC的复合率为衡量指标筛选最佳研制工艺,并测定SM-PC的体外溶出度。结果 SM-PC的最优制备条件如下:以丙酮为反应溶剂,水飞蓟素与大豆卵磷脂的比例为1∶1.8,反应温度56 ℃,反应物的浓度8.0 mg/ml。在此条件下制备3批样品得到SM-PC的复合率为(95.15±1.55)%,偏差<3%。体外溶出试验表明,SM-PC各组分在60 min的溶出接近90 %,主要成分水飞蓟宾的溶出行为与市售水飞蓟素胶囊相似,远高于原料药。结论 采用星点设计-效应面法成功制备SM-PC,明显提高了溶出度,为后续制剂的研究奠定基础。
中文关键词:水飞蓟素  磷脂复合物  溶剂挥发法  星点设计-效应面法  溶出
 
Preparation and in vitro dissolution behaviors evaluation of silymarin phospholipid complex
Abstract:Objective To prepare silymarin phospholipids complex(SM-PC) and investigate its physicochemical properties. Methods On the basis of single-factor tests, the drug-lipid ratio, drug concentration and reaction temperature were selected as the factors of the central composite design and response surface methodology in the preparation of SM-PC by solvent volatilization, and the best process was optimized with the compound rate as the index. And its in vitro dissolution was measured. Results The optimum preparation technology of SM-PC was as follows: acetone was used as compound solvent, the concentration of SM was 8.0 mg/ml, the mass ratio of SM to phospholipid was 1∶1.8, the reaction temperature was 56 ℃ and the recombination rate was(95.15±1.55)% with deviation of less than 3%. The in vitro dissolution test showed that the dissolution of SM-PC was close to 90% in 60 min. The dissolution behavior of main component of silybin was similar to that of silymarin capsules(Legalon ®), which was higher than SM-API. Conclusion SM-PC was successfully prepared by central composite design response surface method, which significantly improved the dissolution and laid a foundation for the study of subsequent preparations.
keywords:silymarin  phospholipid complex  solvent volatilization method  central composite design and response surface methodology  dissolution
查看全文  查看/发表评论  下载PDF阅读器
关闭

分享按钮