用气相色谱法测定血液制品生产过程中中间品乙醇的含量
投稿时间:2018-12-12  修订日期:2019-04-02  点此下载全文
引用本文:盛凤仙,李萍.用气相色谱法测定血液制品生产过程中中间品乙醇的含量[J].药学实践杂志,2019,37(5):464~465,469
摘要点击次数: 1066
全文下载次数: 673
作者单位E-mail
盛凤仙 上海新兴医药股份有限公司, 上海 200135  
李萍 上海新兴医药股份有限公司, 上海 200135 limibao@163.com 
中文摘要:目的 建立气相色谱法测定血液制品生产过程中中间品乙醇含量的方法。方法 采用DB-624毛细管色谱柱,FID检测器,气化室温度230℃;检测器温度280℃;柱温:40℃,保持5 min后,以10℃/min升温至80℃,再以50℃/min升温至230℃,保持3 min;以正丙醇为内标。结果 乙醇在0.5%~5%浓度范围内线性关系良好(r=1.000 0),平均回收率为99.28%,RSD为0.01%(n=9)。结论 该方法简单灵敏,结果准确可靠,可用于血液制品生产过程中对中间品乙醇含量的测定。
中文关键词:中间品  乙醇  血液制品  气相色谱法  测定
 
Determination of ethanol content in intermediate products during the production of blood products by GC
Abstract:Objective To establish a method for determination of ethanol content in intermediate products during the production of blood products by GC.Methods DB-624 column was used with FID detection.The temperature of the injector and detector was 230℃,280℃,respectively.The column temperature was kept at 40℃ for 5 minutes,then increased to 80℃ at 10℃ per minute,and finally to 230℃ at 50℃ per minute for 3 minutes.N-propanol was used as the internal standard.Results The standard curve was linear in the range of 0.05%-5%(r=1.000 0) for ethanol.The average recovery was 99.28% with RSD of 0.01%(n=9).Conclusion This method was simple,sensitive,accurate and reliable.It is suitable for the determination of ethanol content in intermediate products during the production of blood products.
keywords:intermediate products  ethanol  blood products  GC  determination
查看全文  查看/发表评论  下载PDF阅读器
关闭

分享按钮